Car part of the day · Episode 8

Cracked air intake hose: vacuum leak and code P0171

Is your engine hissing, with a rough idle and weak acceleration? A cracked air intake hose may be to blame. This 90-second video shows where it is, and why a single crack throws off the whole engine.

What does the air intake hose do?

The air intake hose is a large, flexible hose mounted between the air filter and the engine, right after the mass airflow sensor. The mass airflow sensor measures the air coming in, then the engine control unit injects just the right amount of fuel. For that calculation to be accurate, all the air has to pass through the mass airflow sensor.

Cracked hose or vacuum leak: the symptoms

With heat and age, the rubber hardens, then cracks. Air then gets in through the crack without being measured: the mixture is short on fuel. The signs:

  • the engine hisses, especially at idle;
  • a rough idle;
  • a loss of power, weak acceleration;
  • sometimes, the engine stalls.

Which fault codes point to a vacuum leak?

The engine control unit stores a fault code, but the check engine light doesn't always come on. The most common is P0171: system too lean. P0174 means the same thing, for the other cylinder bank on larger engines.

CodeMeaning
P0171System Too Lean (Bank 1)
P0174System Too Lean (Bank 2)

P0171 and P0174 at the same time? Both banks are lean: they share a common cause, such as an air leak on the intake, the mass airflow sensor, or fuel pressure that's too low. On cars more than ten years old, an air leak is the number one cause.

How do you find a vacuum leak?

  1. With the engine idling, listen: a hissing sound often gives the leak away.
  2. Check the hose along its entire length, as well as its hose clamps.
  3. A cracked hose is easy to replace.
Read the full video transcript

Is your engine hissing, with a rough idle and weak acceleration? Take a look at this part.

This is the air intake hose. It's a large, flexible hose, mounted between the air filter and the engine, right after the mass airflow sensor.

The mass airflow sensor measures the air coming in, then the engine control unit injects just the right amount of fuel. For that calculation to be accurate, all the air has to pass through the airflow sensor.

With heat and age, the rubber hardens, then cracks. Air then gets in through the crack without being measured, and the mixture ends up short on fuel. The engine hisses, loses power, and sometimes stalls.

The engine control unit then stores a fault code. The check engine light, however, doesn't always come on. The most common one is P0171: the mixture is too lean. P0174 means the same thing, on the other cylinder bank of larger engines.

With the engine idling, listen: a hissing sound often gives the leak away. Check the hose along its entire length, as well as its hose clamps. A cracked hose is easy to replace.