Is your diesel short on power, blowing black smoke when you accelerate, or going into limp mode? The EGR valve may be clogged. This 90-second video shows where it is, what it does and why it gets clogged.
What does an EGR valve do?
The EGR valve, or exhaust gas recirculation valve, is mounted between the exhaust and the engine's intake, often near the manifold. It opens more or less to send part of the exhaust gases back into the engine. Why? To lower the combustion temperature: the engine then puts out fewer nitrogen oxides, which are highly polluting gases.
Clogged EGR valve: the symptoms
On a diesel, these gases are full of soot. Over the years, carbon buildup clogs the valve, or jams it open. Short city trips speed up the buildup. The most common signs:
- a lack of power, sometimes with the car going into limp mode;
- black smoke when accelerating;
- jerking;
- sometimes a rough idle.
Which fault codes point to the EGR valve?
When the valve isn't working properly, the engine control unit stores a fault code, but the check engine light doesn't always come on. The most common is P0401: not enough exhaust gas is being recirculated. With P0403, the problem is the valve's electrical control.
| Code | Meaning |
|---|---|
| P0401 | Exhaust Gas Recirculation Flow Insufficient Detected |
| P0403 | EGR Control Circuit |
Clean or replace the EGR valve?
- A clogged valve can often be cleaned: removed, with a dedicated cleaner.
- If it's stuck, or if its electric motor has failed, it has to be replaced.
- Never delete it: an EGR delete is illegal, and the car would fail inspection.
Depending on the engine, cleaning takes one to three hours: some valves are visible as soon as you open the hood, others require removing the intake manifold.
Read the full video transcript
Is your diesel lacking power, blowing black smoke when you accelerate, or going into limp mode? Take a look at this part.
This is the EGR valve. It's mounted between the exhaust and the engine's intake, often near the manifold. It opens more or less to let part of the exhaust gases through.
Why send these gases back into the engine? To lower the combustion temperature. The engine then puts out fewer nitrogen oxides, which are highly polluting gases.
On a diesel, these gases are full of soot. Over the years, carbon buildup clogs the valve, or jams it open. The result: a lack of power, black smoke, jerking, and sometimes a rough idle.
When the valve isn't working properly, the engine control unit stores a fault code. The check engine light, however, doesn't always come on. The most common one is P0401: not enough exhaust gas is being recirculated. With P0403, the problem is the valve's electrical control.
A dirty valve can often be cleaned: take it off and use a dedicated cleaner. If it's stuck, or if its electric motor has failed, it has to be replaced. Finally, never get rid of it: it's illegal, and the car would fail inspection.