Is your engine shaking at idle, stuttering when you accelerate, or is the check engine light flashing? An ignition coil may be to blame. This 90-second video shows where it is, what it does and how it fails.
What does an ignition coil do?
The ignition coil sits on top of the engine, directly above the spark plug: on most modern engines, there's one per cylinder. It turns the battery's twelve volts into more than ten thousand volts. That high voltage creates the spark at the spark plug, which ignites the mixture of air and gasoline.
Bad ignition coil: the symptoms
With heat and vibration, the coil's casing can crack. The current then escapes through the crack instead of going to the spark plug: that's a misfire. The signs:
- the engine shakes, especially at idle;
- it stutters or loses power when accelerating;
- it uses more fuel;
- the check engine light flashes when the misfires are severe.
Which fault code for an ignition coil?
The code depends on the cylinder: P0301 for the first, P0302 for the second, and so on.
| Code | Meaning |
|---|---|
| P0300 | Random/Multiple Cylinder Misfire Detected |
| P0301 | Cylinder 1 Misfire Detected |
| P0302 | Cylinder 2 Misfire Detected |
With P0300, the misfires affect several cylinders: the cause is then often something other than a single coil (fuel, vacuum leak, the ignition system as a whole).
Ignition coil or spark plug: how to tell?
A simple test: swap the coil from the faulty cylinder with the one next to it, clear the code and drive. If the misfire moves to the other cylinder, it's the coil; if not, check the spark plug.
Can you drive with a bad ignition coil?
Not for long: a misfire sends unburned gasoline into the exhaust and damages the catalytic converter. If the check engine light is flashing, stop as soon as possible.
Read the full video transcript
Is your engine shaking at idle, stuttering when you accelerate, with the check engine light flashing? Take a look at this part.
This is the ignition coil. It sits on top of the engine, directly above the spark plug: on most modern engines, there's one per cylinder.
It turns the battery's twelve volts into more than ten thousand volts. That voltage creates the spark at the spark plug, which ignites the mixture of air and gasoline.
With heat and vibration, its casing can crack. The current then escapes through the crack instead of going to the spark plug: that's a misfire. The engine shakes, loses power, and uses more fuel.
The code depends on the cylinder: P0301 for the first, P0302 for the second, and so on. With P0300, the misfires affect several cylinders: in that case, the cause is often somewhere else.
Here's a simple test: swap the coil from the faulty cylinder with the one next to it. If the misfire moves to the other cylinder, it's the coil; if not, check the spark plug. Don't drive like this for long: a misfire damages the catalytic converter.