Car part of the day · Episode 12

Bad turbo: symptoms, limp mode and code P0299

Is your diesel lacking power, going into limp mode, or whistling when you accelerate? Before blaming the turbo, watch this 90-second video: it shows how the turbo works and what makes it lose boost, often without the turbo itself being broken.

How does a turbo work?

The turbo is mounted on the exhaust, right where the gases leave the engine. On one side, the exhaust gases spin a turbine. On the other, on the same shaft, a wheel draws in air and blows it into the engine. By compressing the air, the turbo forces more oxygen into the cylinders: the engine can burn more fuel, and makes more power. On a diesel, movable vanes adjust the pressure according to engine speed: this is the variable geometry turbo.

Bad or worn turbo: the symptoms

  • a loss of power, especially when accelerating;
  • limp mode: the engine control unit limits power to protect the engine;
  • a whistling sound when accelerating, often a sign of a pressurized air leak (boost leak).

Often, the turbo itself isn't broken: with carbon buildup, the movable vanes stick, or a pressurized air hose cracks and the air from the turbo leaks out.

What does code P0299 mean?

The engine control unit stores a fault code, but the check engine light doesn't always come on. The most common is P0299: the turbo's boost pressure is too low (underboost). With P0234, it's too high.

CodeMeaning
P0299Turbocharger/Supercharger "A" Underboost Condition
P0234Turbocharger/Supercharger "A" Overboost Condition

What to check before replacing the turbo?

  1. The hoses and clamps between the turbo and the engine: a leak is the most common cause.
  2. The vane actuator, which moves the vanes.
  3. The boost pressure sensor: its connector and its wiring.
  4. The turbo last, once everything else checks out.

Can you drive in limp mode?

Yes, gently and for a short distance, to get to a repair shop: limp mode is there precisely to protect the engine. Avoid hard acceleration, and have the fault codes read soon.

Read the full video transcript

Is your diesel lacking power, going into limp mode, or whistling when you accelerate? Take a look at this part.

This is the turbo. It's mounted on the exhaust, right where the gases leave the engine. On one side, the exhaust gases spin a turbine. On the other, a wheel blows air into the engine.

By compressing the air, the turbo forces more oxygen into the cylinders. The engine can then burn more fuel and make more power. On a diesel, movable vanes adjust the pressure according to engine speed.

With carbon buildup, these vanes stick. Or a pressurized air hose cracks, and the air from the turbo leaks out. The engine lacks power, and the engine control unit may switch to limp mode.

The engine control unit then stores a fault code. The check engine light, however, doesn't always come on. The most common one is P0299: the turbo's boost pressure is too low. With P0234, it's too high.

Before blaming the turbo, check the hoses and clamps between the turbo and the engine: a leak is the most common cause. Then check the vane actuator, and then the pressure sensor. The turbo itself comes last.