Car part of the day · Episode 11

Bad camshaft phaser: symptoms and code P0016

Does your engine rattle for a few seconds on startup, feel sluggish, or idle rough? The camshaft phaser, also called the cam phaser, may be to blame. This 90-second video shows where it is and how it works.

What does a camshaft phaser do?

The phaser is mounted on the end of the camshaft, behind the timing cover, and driven by the timing chain. A solenoid valve, often called the VVT solenoid, feeds it pressurized engine oil. Depending on engine speed, the engine control unit can then advance or retard the camshaft relative to the crankshaft: the valves open at the best moment, for more torque, more power and lower fuel consumption. This is called variable valve timing (VVT).

Bad cam phaser: the symptoms

Most of the time, the oil is to blame: old or dirty oil clogs the solenoid valve's small filter, or makes the phaser stick. A stretched timing chain also throws off the camshaft timing. The signs:

  • a rattle for a few seconds on startup;
  • an engine that runs rough, especially at idle;
  • a lack of power, with a sluggish feel.

Which fault codes point to the cam phaser?

The engine control unit stores a fault code, but the check engine light doesn't always come on. The most common is P0016: the camshaft position no longer matches the crankshaft position. With P0011, the camshaft no longer follows the timing the control unit asks for.

CodeMeaning
P0016Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
P0011"A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

What to check for code P0016?

  1. Start with the oil: its level, its condition, and the right grade, the one the manufacturer recommends.
  2. Then check the phaser's solenoid valve and its small filter.
  3. If the code comes back, have the timing chain checked right away.

Can you drive with code P0016?

For a few miles, carefully, but not for long. If the cause is a stretched timing chain, it can end up skipping: the engine can then be seriously damaged. Have it checked soon.

Read the full video transcript

Does your engine rattle for a few seconds when you start it, feel sluggish, or idle rough? Take a look at this part.

This is the camshaft phaser. It's mounted on the end of the camshaft, behind the timing cover, driven by the timing chain. A solenoid valve feeds it oil.

Depending on engine speed, the engine control unit advances or retards the camshaft relative to the crankshaft. That way, the valves open at the best moment: more torque, more power, and lower fuel consumption.

Old or dirty oil clogs the solenoid valve's small filter, or makes the phaser stick. A stretched chain also throws off the camshaft timing. The engine runs rough, lacks power, and may rattle at startup.

The engine control unit then stores a fault code. The check engine light, however, doesn't always come on. The most common one is P0016: the camshaft position no longer matches the crankshaft position. With P0011, the camshaft no longer follows the timing the control unit asks for.

Start with the oil: its level, its condition, and the right type. Then check the solenoid valve and its filter. If the code comes back, have the timing chain checked right away: a chain that skips a tooth can seriously damage the engine.