Car part of the day · Episode 13

Diesel fuel rail: pressure too low and code P0087

Is your diesel hard to start, stalling, or lacking power when you accelerate? The problem may be the pressure in the fuel rail. This 90-second video shows how a common rail injection system works, and what makes the pressure drop.

What does the fuel rail do?

The fuel rail, or common rail, is a thick tube mounted on the engine and connected to each injector. A high-pressure pump fills it with diesel fuel. Inside the rail, the diesel is held under enormous pressure, more than a thousand bar. A sensor measures it constantly, and the engine control unit adjusts it according to how hard you accelerate.

Low fuel rail pressure: the symptoms

When the fuel filter clogs up, the pump runs short of fuel, and the pressure can't keep up:

  • the engine is hard to start;
  • it lacks power when accelerating;
  • it goes into limp mode, or stalls.

A leak or a worn pressure regulator causes the same symptoms.

What does code P0087 mean?

The engine control unit stores a fault code, but the check engine light doesn't always come on. The most common is P0087: the pressure in the fuel rail is too low. With P0088, it's too high.

CodeMeaning
P0087Fuel Rail/System Pressure Too Low
P0088Fuel Rail/System Pressure Too High

What to check for code P0087?

  1. Start with the fuel filter: it's the most common cause.
  2. Then check that there are no diesel leaks at all.
  3. The pump and injectors should be tested at a repair shop.

Warning: a very high-pressure system

Never touch the injection system with the engine running: at more than a thousand bar, a jet of diesel fuel can cause serious injury. Pressure measurements should be done with a repair shop's equipment.

Read the full video transcript

Is your diesel hard to start, stalling, or lacking power when you accelerate? Take a look at this part.

This is the fuel rail. It's a thick tube, mounted on the engine and connected to each injector. A high-pressure pump fills it with diesel fuel.

Inside the rail, the diesel is held under enormous pressure, more than a thousand bar. A sensor measures that pressure constantly, and the engine control unit adjusts it according to how hard you accelerate.

When the fuel filter clogs up, the pump runs short of fuel. The pressure can't keep up: the engine is hard to start, lacks power, or goes into limp mode. A leak or a worn pressure regulator causes the same symptoms.

The engine control unit then stores a fault code. The check engine light, however, doesn't always come on. The most common one is P0087: the pressure in the rail is too low. With P0088, it's too high.

Start with the fuel filter: it's the most common cause. Then check that there are no leaks at all. The pump and injectors should be tested at a repair shop: this system runs at very high pressure, never touch it with the engine running.